Getting your hands on the Greubel Forsey platinum GMT luxury replica watches

zelin0802

In 2014, Swiss watchmaker Greubel Forsey replica released a new version of this timepiece called the GMT, made of platinum and with a black dial. Brands often tend to give their most expensive watches a flashy title. Like the aristocratic indicators of old, it is almost surprising that this timepiece is available in highly luxurious trim levels, yet its name consists of only three letters.

At 43.50mm wide and with a mostly round platinum case, the GMT makes a serious statement on the wrist. Virtually all Greubel Forsey watches are wrist statements, but the good news is that the brand does deliver on its promise with products that no one else seems to be able to offer. The 16.14 mm thick case has been hand-decorated with a large amount of platinum, which is actually quite convenient as a two-place travel high quality watches replica. Practical? Not so much.

The whole point of the GMT is to take a Greubel Forsey concept and add a 24-hour second time zone indicator to it, plus some kind of fancy tourbillon. The indicator takes the form of a globe (viewed top down from the North Pole) that rotates every 24 hours. A 24-hour scale helps the titanium globe further serve as a world time indicator. If you don’t think it’s that easy to tell the time elsewhere in the world by looking at a charming little globe, then all you need to do is turn your cheap replica watches.

The GMT indicator on the case back is displayed as a full-fledged world time disc, with reference cities indicating the time in the 24 time zones. There’s even a center disk indicating “Daylight Savings Time” when Daylight Savings Time (DST) isn’t in effect. Having a full world time disc is very convenient, although having to take the watch off to check it is a bit strange. Then again, there’s a lot to see on the dial side. replica Patek Philippe

In addition to the 24-hour disc/globe, there is a second time zone hand that allows for easy reading of other time zones. A separate hour hand directly above the globe displays the second time zone in a 12-hour format. The button on the left side of the watch face is used to quickly adjust the time for travel. Basically, the Greubel Forsey GMT watch combines a world time function with a second time zone function. It doesn’t actually have a GMT hand in the traditional sense, which is a bit ironic.

Of course, the Greubel Forsey movement GF05, manufactured and designed in-house, doesn’t stop there. It also displays the main time via a ostensibly legible off-center dial as well as a secondary seconds dial and a power reserve indicator. The details and decorations on the dial are extremely rich and full of three-dimensionality. Perhaps the most enjoyable thing about a Greubel Forsey watch is examining the dial as if you were looking down at a city from the air. This is not a painting that looks good only when viewed from a distance, as the strong level of decoration invites a closer look at each finished part. replica Richard Mille

The case’s bulges are typical of the brand and add to the quirky charm inherent in each model. Although this sport is something that most people can appreciate. However, in GMT, not much movement is seen. Sure, you can see the tilted 24-second tourbillon happily spinning on the dial, but most of the mechanics are hidden beneath the dial and movement bridges. high quality replica watches

Still, because it’s Greubel Forsey, you know the movement goes through countless degrees of decoration and finishing – even all the parts you can’t see. The GF05 movement is composed of 443 parts and has a power reserve of 72 hours when running at 3Hz. While it’s not part of the movement itself, you can see more of the rotating globe through the sapphire crystal window on the side of the case. replica audemars piguet code 11.59

Dial finishing is very important to Greubel Forsey and one thing they really get right is texturing. Print and hand pop because they generally know how to get textural elements right (and often creatively). This tends to mean that the polished surface is mirror-like but also doesn’t blur together, and the hands and indicators are easy to see. Most dials are gold, although there are various platings or finishes.

Whether you like the way they look or not, every Greubel Forsey watch is a work of art. This GMT may not be my favorite model from the brand, but there’s no denying that it’s attractive and actually useful. Also new for 2014 is the Greubel Forsey QP (perpetual calendar), which is probably the most comfortable to read and operate among calendar watches of its type. It really depends on what you want, but if it happens to be an extremely luxurious timepiece but still feels functionality is important, then it’s probably a Greubel Forsey. jacob and co astronomia replica

What we can expect from the successor to the Patek Philippe Nautilus 5711

zelin0802

It all started with rumors in January 2021. We’ve heard that Patek Philippe is about to discontinue its most iconic sports watch, the chronograph Nautilus 5711 (which, coincidentally, is one of the most sought after on the second-hand market). The rumors are true, as Thierry Stern announced the discontinuation of the blue dial 5711/1A-001 model introduced in 2006. But then, two things happened. First, the brand released its one-year-old farewell edition, the olive green Nautilus 5711. Of course, there’s also the Tiffany Blue 5711, only 170 of which will be produced. Now, we know that the Nautilus 5711 is definitely gone and discontinued. This is not the end of the story for the Patek Philippe Nautilus. Will there be watches to keep the legend alive…? We believe so, and that’s what we’d like to see in the new Patek Philippe Nautilus – let’s call it the 6711 for now.

Patek Philippe and its president, Thierry Stern, have recently communicated mainly through interviews with the Neue Zurich Zeitung or the New York Times. First, in February 2021, Mr. Stern announced the cessation of production of the classic blue dial Nautilus 5711/1A-001, which was launched in 2006 as a 30th anniversary model, following in the footsteps of the first Nautilus , ref. 3700. In the interview, Stern gave multiple reasons for the discontinuation of the blue 5711, including that he didn’t want one model to suddenly occupy 50% or more of our collection and dominate Patek Philippe’s image. ” and then added that “it’s not enough to make the most beautiful watches in the world.” I also have to make sure they hold their value, and rarity is one of the keys to that. This is important for customers who invest in Patek Philippe. “

In the same interview, Mr Stern also said the brand was planning to release “little surprises”. So there will be a farewell series of 5711, which will be a little different. ” And this surprise is reflected in the shape of the olive green dial Nautilus 5711/1A-014, which was produced for less than a year from April 2021 to early 2022.

Watch production is small and demand is high, a situation that only increases the popularity of the Nautilus (all colors), sending prices skyrocketing on the used market. Stern was aware of the situation, explaining before the launch that “it’s going to be another nightmare on the demand side.” But the worse situation has yet to be revealed. That’s the shape of the Tiffany Blue 5711, a watch created in collaboration with the New York retailer and jeweler to celebrate its 170th anniversary and limited to 170 pieces. We expect watches to be auction spoilers, but certainly not in the millions. Again, Thierry Stern is fully aware of the problems associated with such a launch, telling The New York Times: “I Not sure it’s a gift for them. It could be a big deal. They probably don’t realize how difficult it is to select customers.”

A watch that really needs to be replaced…
Some say the Tiffany blue and olive green versions of the Nautilus are the last of their kind…and, they don’t mean the last of the 5711 (now known to be a reality), but the last of the time-and-date Patek Philippe Nautilus . period! Well, let’s clarify the situation a little bit. In the same interview with the New York Times by Mr. Stern, when he announced the end of the Blue 5711 and the release of the Green model, the Patek Philippe president also said “We have a plan. A replacement reference. The 5711 will be quite important. It will be more important than the reference. Better. 5711. But I’m not going to say what metal today, or if it’s steel. It would be another matter, very close and logical.”

Not only did the brand’s president announce that there would be a replacement, but we inevitably put the question on the MONOCHROME table. We are well aware that Patek Philippe simply cannot kill the classic time and date Nautilus. Launched in 1976, this watch represents an important part of the brand’s modern history. It was this watch that allowed Patek Philippe to enter new markets and appeal to a different audience. This is the brand’s entry into modernity and casual sports watches. Since then, it has become a true icon of watchmaking. If not for business reasons, the Nautilus 5711 must be replaced for legacy reasons. As Stern said, this watch is a difficult product. “Stopping Nautilus was an important decision,” he said, adding that “there’s a lot of noise around this nautilus. (…) We can’t put a watch on top of the pyramid.” But he also realized that he “will always There are not enough watches for everyone on the list.”

With that in mind, discontinuing the Nautilus 5711 was certainly a complicated decision, but it also opened the door to other things. Somewhat different, but some the same – at least for us, it is likely that the new Nautilus unveiled at the 2022 Geneva Watch Fair will retain most of the elements that have made the Nautilus successful since 1976. But the biggest problem remains the material. watches luxury replica

We expect the Patek Philippe replacement for the Nautilus 5711 (and possibly the Nautilus 6711) will go in the same direction, the only difference being that we think the PP will be a bit bolder and will create a deeper evolution. Visually, the new Nautilus time and date must be consistent with previous generations. Released in 2006, the 5711 was only a slight update to the design of the original 1976 reference 3700—the most obvious difference being the circular hinge on the side of the case. Mechanically, however, the introduction of the Caliber 324 made a huge difference compared to the older JLC-based movements, and also introduced a central seconds hand. But between 1976 and 2006, production technology and movement design changed dramatically. However, between 2006 and 2022, this was not the case.

Back to possible Nautilus 6711. What we expected was a watch that was only slightly different from the 5711, at least in terms of design. The shape and proportions of the recently discontinued models are nearly perfect, and there’s no reason to drastically change them. We can probably count on tenths of a millimeter here and there, but overall the likely 6711 will be a watch that doesn’t change much. At least, that’s what we’d like to see.

The main evolution we expect to see when replacing the Patek Philippe Nautilus 5711 has to do with the movement. The last version of the 5711 was equipped with an in-house Calibre 26-330 SC (replacing the 324 in 2019), equipped with a stop-seconds function. This movement is already well equipped with a Gyromax balance wheel and a Spiromax balance spring (made of Silinvar, a silicon-based material). However, this movement is known for its short power reserve, with a brand rating of “minutes. 35 hours – maximum. 45 hours.” In 2022, we can certainly expect better offerings from brands like Patek Philippe, without compromising the thinness of the movement and the watch that houses it. So we would expect a possible Nautilus 6711 to be equipped with a self-winding movement, with a power reserve of around 60 to 70 hours (if AP has done this with the 7121 calibre, certainly Patek Philippe can too).

If Patek Philippe is releasing a new version of the Nautilus time and date, we can tell you with absolute certainty one feature of the watch ahead of time…it’s about availability. Don’t expect this possible Nautilus 6711 to be a mass watch. It won’t. period!

Corum Golden Bridge

zelin0802

Corum replica has been a highly regarded avant-garde watchmaker since the 1950s. Their design choices draw inspiration from fashion, art and architecture. Respected for their ability to master women’s and men’s watch design. The risk they take with the case sets them apart. Since its inception, Corum watchmaking has been ahead of its time.

The Corum Golden Bridge watch dates back to 1980 when it was first introduced. This model is considered a unique creation of fine watchmaking, with its original design featuring a linear movement and most of the dials. Corum made a bold choice to design the first fully transparent watch. This skeleton watch showcases the watchmaker’s masterpiece and its mechanical beauty. Vincent Calabrese used his talent to create movements with linear gear trains, mounted on a transparent exterior and isolated in space, with no visible connections.

The Golden Bridge is poised, technical, and an icon in its own right. The 113.160.55/002 0000 model has a skeletonized dial; the signature tonneau-shaped rose gold case and a contrasting brown alligator strap. Equipped with an automatic winding mechanism, this timepiece is calibre CO 113 with a 40-hour power reserve when fully wound. The watch is water-resistant to 30 meters and has a watch-like transparency.

Corum Golden Bridge The Corum Golden Bridge uses four sapphire crystals, framed above, below and on the sides by four slender gold ribs, almost like a crystal window that opens the time. The sapphire crystal caseback of the Corum Golden Bridge is secured by four golden screws, ensuring the watch is perfectly water-resistant to a depth of three atmospheres. The latest technological discoveries are used in the production of the replica Corum Golden Bridge watch. The winding and time-setting crown at 6 o’clock, engraved with the CORUM key, extends straight down from the movement and activates the “sliding spring” winding system that avoids stress on the delicate mechanism. The Corum Golden Bridge movement is fully wound and has a power reserve of 40 hours.

Richard Mille RM 88 Automatic Tourbillon Smiley

zelin0802

A yellow circle, two oval eyes, a large upturned mouth… The smiling face drawn by Franklin Loufrani more than 50 years ago has become an established symbol in the collective consciousness. It is the embodiment of positivity, joy and sharing, and has played a major role at the heart of pop culture for generations of creatives. This leadership role was enough for Richard Mille’s team to start creating an emotion-driven copy watch that emphasized all of these values.

mechanism of smile

Around the radiant face of the smiling face, a series of miniature sculptures occupy the movement of the RM 88 Automatic Tourbillon Smiley, forming and transforming a surreal scene full of fun and enthusiasm, demonstrating a true mastery of the infinitely small. As light as it may seem, the creation of this ballet was a technical challenge of the highest order. But the dream is now a reality, with extreme attention to detail and perfection that breathes life into the veritable smile mechanism.

Bottom plate and bridges are made of grade 5 titanium
Micro-sprayed grade 5 titanium with PVD treatment provides great rigidity to the baseplate and bridges, as well as the precise surface flatness that is essential for the perfect operation of the gear train.

Grade 5 titanium is a biocompatible, highly corrosion resistant and very hard alloy that enables the gear train to operate with ease. Richard Mille RM 88 Automatic Tourbillon Smiley

The alloy is 90% grade 5 titanium, 6% aluminum and 4% vanadium. This combination further enhances the mechanical properties of the material, which explains its frequent use in the aerospace, aviation and automotive industries.

The skeletonized baseplates and bridges undergo intensive and complete verification testing to optimize their resistance capabilities.

On top of the Microblasted ARCAP® Additional Motion Work Bridge, a striking gold smiley figure, microblasted and painted, dominates the landscape, complete with polished corners and brushed edges. Featuring a larger iridescent pattern, hand-applied varnished to contrast with anthracite-coloured rhodium-plated, shimmering subtle reflections.

No effort has been spared in finishing, down to the tiniest detail of every element in this display. The cocktail glass consists of four parts, all of which are golden. Umbrellas, olive trees (1.7mm high), fluted straw 0.4mm in diameter – all polished – and the glass itself, whose bottom is micro-blasted to convey its coldness, weighs just 0.4g in total. The gold flowers on it are mirror-polished, and the petals are brushed and rhodium-plated. This pink flamingo, 0.2 gram red gold, has also undergone multiple processes: its wings are polished and its feathers are depicted with the tips of a degussi millstone; its eyes are made with the smallest beading tool in existence ; its base is micro-blasted and the parts depicting grass and water are polished. The component was given a metallic pink PVD coating before the beak was painted black using a brush.

The pursuit of perfection is always there, green PVD ​​coated leaves, pineapple micro-blasted and polished surface, gold cactus micro-blasted, one-by-one polishing to remove PVD ​​​​coating, and sun, micro-blasted gold, polished rays . In keeping with watchmaking tradition, all finishing operations on the RM 88 Smiley are done by hand.

This type of balance wheel represents the pinnacle of innovation. It ensures greater reliability against shocks and during movement assembly or disassembly, resulting in better timekeeping results over time.

Adjuster indices are eliminated and more accurate and repeatable calibration is possible thanks to 4 small adjustable weights located directly on the balance.

ATZ white gold ceramic and red gold case

Such brilliant colors and sets, front and back, deserve an environment that does justice to the composition.

The design and execution of the watch demonstrates a holistic approach to the movement and case concept. Therefore, everything is built to extremely strict specifications. For example, casing rings are no longer used, and the movement is mounted on chassis-mounted rubber (ISO SW) secured by titanium screws.

The bezel and caseback are made of ATZ white ceramic. This is made from a tube of aluminium oxide powder injected under a pressure of nearly 2,000 bar. This high-pressure injection increases stiffness by 20 to 30 percent and minimizes material porosity. ATZ is known for its high scratch resistance (1,400 Vickers) and unchanging color. Second only to diamond, it is one of the hardest materials in the world. Long and difficult machining with diamond tools was required to create this perfect example of the intricately curved bezel and satin finish. Richard Mille RM 88

The strap is made of 18K 5N red gold.

The tripod case is water-resistant to 50 meters, secured by 2 nitrile O-rings. The case is assembled with 12 grade 5 titanium spline screws and 316 L stainless steel wear washers.

Jacob & Co. and Steet Artist Alec Monopoly create astronomical models

zelin0802

This is not the first time Jacob & Co fake has turned the field of haute horology into a playground. The Astronomia model is the brand’s favorite experimental place.

A miniature godfather statue and a roulette wheel have been found under the domed sapphire glass of the Astronomia hollow dial. However, the Astronomia Alec Monopoly watch may have the boldest dial ever built by Jacobs.

This may be related to the young blood infusion that the brand received in March when Jacob Arabo’s 28-year-old son Benjamin took over. Or it may be the graffiti artist himself and his iconic characters, who collaborated with Jacob & Co. to transform them into miniature sculptures and give Astronomia a new look.

Alec Monopoly has also worked with TAG Heuer in the past. He is one of the few outstanding graffiti artists whose works have been taken to the streets and hung on the walls of the gallery. Alec grew up in New York and started out as an illegal street artist, which is why he covered his face for a long time. Online cheap watch

However, he was not as good at keeping a low profile as Banksy, and was accidentally shot at a party. This lifted his veil and thwarted his days of illegal labeling. Monopoly is now a prolific producer of fine art.

The board game banker who symbolizes the power of money in our world also appears on the astronomical watch. In addition to the Monopoly mascot named Rich Uncle Pennybags, some of the artist’s favorite characters also appear on the dial. There is Scrooge McDuck and a dollar sign full of graffiti with the Jacob & Co. logo on it.

Another figure wearing a top hat is similar to Alec himself, he used to cover half of his face with a headscarf. All figures are hand-carved according to the artist’s drawings, then cast in gold and painted by the artist. Next to the frame of the double-axis tourbillon of the Astronomia movement, stands the image of the artist’s vivid imagination.

The time display subdial and the dual-axis tourbillon are located at both ends of a shaft. At the end of the second axis is a miniature globe and a one-carat Jacob-Cut diamond. One shaft rotates every five minutes, while the second one takes one minute.

The 288 jewels and the globe rotate every 60 seconds. The canvas of this work is provided by an aventurine dial that is reminiscent of the starry sky. The diameter of the case made of rose gold is 50 mm, and the height of the highest point of the sapphire crystal dome is 25 mm. Only nine people who have an appreciation for fine street art are lucky enough to be the owners of this masterpiece. Shopping fake watch