Richard Mille Watch – Tourbillon RM 56-02 Sapphire

In 2011, Richard Mille pioneered the RM 056 sapphire tourbillon split-seconds chronograph with an all-sapphire case, and upped the ante on technology with the subsequent RM 56-01, which also manufactures the baseplate, bridges Plate and third wheel sapphire. Last year, the Richard Mille Tourbillon RM 56-02 Sapphire debuted, combining a tripartite sapphire case with the brand’s revolutionary “wired movement” design.

The movement architecture used in the Richard Mille Tourbillon RM 56-02 Sapphire draws inspiration from the movement of another Richard Mille watch, the RM 27-01 Rafael Nadal, which was co-developed by the Spanish tennis star. The base plate of the RM 56-02 movement is made of tough but lightweight titanium and is suspended within an all-sapphire case using a single braided cable just 0.35mm thick. The movement uses a system of four pulleys on its corner posts and another six pulleys on its periphery. A micro-ratchet at 9 o’clock controls cable tension. The entire system is misconnected with an indicator at the 12 o’clock position, allowing the wearer to check the tension of the pulley to ensure it is operating within specified specifications.

The transparent sapphire case consists of three parts, each milled from a solid block of sapphire with a hardness of 1,800 Vickers, making it scratch-resistant to almost any material except diamonds. Sapphire is also used for movement components, including the winding barrel bridge, the center bridge, and even the tourbillon. Each RM 56-02 is crafted by experts at Stettler in Lessa, Switzerland, requiring 40 days of 24/7 continuous machining of the case, followed by an additional 400 hours of machining and finishing for the movement bridges.

Despite its somewhat refined appearance, the Richard Mille Tourbillon RM 56-02 Sapphire is water-resistant to 3 meters thanks to two clear nitrile O-rings and 24 spline screws made of grade 5 titanium. The front and rear bezels of the case are treated with anti-glare protection. The “see-through” aesthetic extends to the partially translucent strap, crafted exclusively for Richard Mille using a proprietary aerospace nanomaterial whose silky, organic texture complements the ergonomic design of the case. The Richard Mille Tourbillon RM 56-02 Sapphire is an extremely limited edition. Best fake watch

Bugatti Chiron 16-cylinder tourbillon from Jacob & Co.

Just last year, Bugatti and Jacob & Co. signed an agreement to create timepieces that pay tribute to the power and performance of the two brands. Initially, two timepieces were created: Twin Turbo Furious and Epic X Chrono. Now, although the two companies have launched a new product line: Bugatti Chiron, to commemorate Bugatti’s super sports car.

In order to capture the spirit and energy of the high-performance Bugatti Chiron, Jacob & Co. spent only about a year in the development phase, and then launched a new Bugatti Chiron tourbillon worth $280,000. The watch is equipped with a movement imitating a Bugatti 16-cylinder engine, equipped with a crankshaft and pistons. In fact, the 16-cylinder piston engine of the hand-wound movement consists of a large number of 578 hand-assembled parts.

It not only provides hours and minutes, but also a newly designed one-minute tourbillon frame, tilted 30 degrees, provides a spectacular view of the constantly rotating escapement, and compensates for timing errors caused by the gravity effect of the watch on the watch. In certain positions of the wrist. Jacob & Co. worked with the movement designer to develop this extraordinary new escapement, which itself took a whole year. It can be seen through a hole similar to a Bugatti grill.

Even more impressive is that this watch is equipped with a pusher on the right side of the case. When it is activated, it rotates the crankshaft and pushes the movement’s piston up and down-just like in a car engine. There are two turbochargers in the watch, which also rotate when the engine is running to increase the impact. According to Jacob & Co., the solid stainless steel crankshaft is one of the smallest and most complex parts manufactured in the watchmaking world.

The movement of the Bugatti Chiron Tourbillon is suspended in the case, with four shock absorbers similar to those of a car. Due to these vibrations, when the wearer moves, the movement actually floats slightly up and down inside the case. The creation of this patented design is also challenging, because it requires a special traverse system, so the crown column can withstand the up and down movement of the upper case in the case. The JCAM37 movement is further equipped with Incabloc anti-shock system-all of which is to pay tribute to the super sports car that inspired it.

The powerful black titanium case is inspired by Chiron’s lines, and thanks to the impressive and difficult-to-manufacture sapphire crystal, the wearer can see the engine inside. Even the sides of the case are made of sapphire to improve the visibility of all moving parts. You can see the EB (Bugatti) logo on the engine compartment and the Jacob & Co. logo on the flying tourbillon. At the bottom of the case is the crown for setting the time and winding movement, which provides a power reserve of 60 hours. high luxury store

The black rubber strap further emphasizes the secret appearance of the black case. Apart from black and steel, the only color is the bold Chiron blue for the hands and certain moving parts. With a 16-cylinder piston engine, one might say that this Jacob & Co. Bugatti Chiron Tourbillon “fires on all cylinders.”

Jacob & Co. BUGATTI CHIRON RED AND BLACK Watch Replica BU200.21.AI.UA.BBRUA Jacob and Co Watch Price

REFERENCE:

BU200.21.AI.UA.BBRUA
MATERIAL:
Black Titanium
THICKNESS:
20 mm
DIAMETER:
55×44 mm
POWER RESERVE:
60-Hours
Year:
2021
MOVEMENT CALIBER:
Exclusive Jacob&Co. Manual Winding JCAM37
WATER RESISTANCE:
30 meters
FUNCTIONS:
Hours and Minutes